Titanium Anodizing Racks

Titanium Anodizing Racks

Material: Titanium Gr1, Gr2

Application: Electroplating, anodizing, water treatment etc.

Size: Customized by customer's drawings

Surface: Polished

Titanium anodizing racks can allow current to pass freely, and will not burn components due to overheating due to too small cross-section and too large resistance. Its contact area with parts is small, and the contact part will not cause partial overheating and burn parts and components; those with universal hangers For parts that cannot be hung, in order to ensure production quality and improve consumption efficiency, special hangers can be designed and manufactured according to the appearance and oxidation parts of the parts.

 has good conductivity and is made of acid-resistant titanium. The hook made of the best red copper plate in contact with the conductive rod can make the current pass freely. The Titanium jigs / titanium hangers will not be burnt due to the too small cross-section and too large electric cathode, which will cause overheating. The contact area between the titanium hanger and the part is small, but the current is guaranteed to pass. The contact point does not produce partial overheating, burning parts or hangers.

Thin plates or molded parts with a thickness of less than 0.6mm, parts with high dimensional accuracy and brightness, hard anodized parts, and parts that cannot be mounted with general-purpose jigs/hangers. In order to ensure production quality and improve consumption efficiency, they must be based on The shape of the parts and the anodized parts design and manufacture special hangers to ensure the quality of anodized parts